17 octobre 2024

Journée Technique PCB 17 Octobre 2024

La société Wurth Elektronik sera présente toute la journée au travers de présentations techniques sur la conception et la fabrication des circuits imprimés (PCB), phases essentielles du développement d’une carte électronique.
Les présentations aborderont des sujets très variés tels que la conception et la fabrication de PCB multicouches rigides et souples, les matériaux utilisés, les types de finition, les facteurs de coût, la dissipation thermique ainsi qu’une présentation du site de commande en ligne.
Début des présentations: 9h00 (Batiment 25 -Amphi Grunewald).
L’horaire des présentations est donnée à titre indicatif dans les rubriques « Ordre du Jour » et « Liste des contributions » et pourra être adaptée en fonction du timing et de la demande des participants.
Le véhicule WEmobile sera présent toute la journée à côté du batîment 25 avec la présentation d’échantillons des produits Wurth. Venez à tout moment pour poser vos questions et discuter de vos projets si vous le souhaitez.

https://indico.in2p3.fr/event/33291/

En savoir plus

17 octobre 2024, 09h0017h00
Bâtiment 25 - Amphi Grünewald (CNRS Strasbourg - Campus de Cronenbourg - Institut Pluridisciplinaire Hubert Curien (IPHC))

Début : 17/10/2024 à 09:00
Fin : 17/10/2024 à 17:00


Prochains évènements

Retour à l'agenda
29 avril 2025

Spatially fractionated radiotherapy: Challenges, advantages and opportunities

Speakers: Savernaz Keshmiri (STROBE-IRMaGe / Université Grenoble Alpes) The goal of radiotherapy is to achieve a better therapeutic index by enhancing tumor control probability while minimizing side effects. One strategy to enhance the sparing of normal tissue is to induce the dose-volume effect through spatial fractionation of the irradiation (SFRT) beam. By using an array of narrow beams with micrometric widths instead of a homogeneous beam, healthy tissues exhibit greater radiation tolerance, allowing for an increase in the administered dose. Most studies on microbeam and minibeam radiation therapy have been conducted at synchrotrons, where high-dose-rate, quasi-parallel orthovoltage X-rays combine SFRT with the FLASH effect.After reorienting my research career from nuclear engineering to medical physics, I pursued a PhD on SFRT. My research focused on developing a multiscale Monte Carlo (MC) dose calculation engine (ranging from the centimeter to the micrometer scale) for synchrotron microbeam radiation therapy (MRT). The PENELOPE MC code was chosen for its ability to model low-energy electrons with high precision and account for synchrotron photon polarization. This engine, named penMRT, was validated using cross-validation with already validated codes like Gate. During my research carrier, I had the opportunity to participate in the very first translational trials on MRT in European synchrotron of Grenoble, treating canine patients with spontaneous gliosarcoma. This study demonstrated a tumor volume reduction of over 70% within a single MRT session, without any observed toxicity.After these promising results and two decades of preclinical research, spatial fractionation is now on the verge of clinical implementation. To achieve this, the technique needs to be tested in clinical conditions, where the radiation beam—unlike synchrotron-generated X-rays—is divergent and delivered at a much lower dose rate. This is why we continued our research as research project as part of my research engineer poste, working on implementing spatial fractionation-based treatment on the Small Animal Radiation Research Platform (SARRP), where the radiation source closely resembles those used in clinical settings. In this context, we designed and optimized a versatile, low-cost, and easy-to-mount collimator using MC simulations. Currently in fabrication, the collimator will be characterized using film dosimetry and microdiamond detectors upon delivery. Since commercial treatment planning systems cannot account for SFRT, penMRT will be used for treatment planning and dose prescription. As an open-source code, penMRT can be integrated into commercial software, facilitating SFRT implementation in research centers.As part of our collaborations, I have also worked with two teams—one from Grenoble (Laboratoire de Physique Subatomique et Cosmologie) and another from Lyon (Institut des Nanotechnologies de Lyon)—on the development of diamond detectors and micro-scintillators for quality assurance in spatially fractionated radiotherapy. My role involves MC simulations at the micrometric scale to optimize scintillator seed sizes, interpret detector response through intercomparison of simulations and measurements, and compare detector performance with other dosimetry techniques, such as film dosimetry.Looking ahead, it would be interesting to develop algorithms to reconstruct dose distributions from real-time detector data acquired during patient treatments. Comparing these reconstructed doses with planned doses would enhance treatment precision assessment. Additionally, estimating secondary particle contamination would help quantify the total dose received by the patient, improving overall treatment safety and effectiveness. https://indico.in2p3.fr/event/35981/